Adding an Internal USB Hub

Using this hub from dealextreme:

http://www.dealextreme.com/details.dx/sku.13526

Get some crimp pins from a site like this:

http://www.tmbelectronics.com/index.php?main_page=product_info&cPath=26_28_30&products_id=194

snip the plugs off the non-power input plug, and 1 of the output sockets, and crimp on the pins, then connect like so to the 14 pin connectors on the main board and the USB board.

Looking down the stora (with it the right way up!) And looking at the top of the USB board with the USB port away from you.

o		o		o		o		o		o		o
USB 5V          USB Gnd         USB Data +      LED D4 Red      LED D3 Blue     LED D5 Red      LED Common
red             black           green


o		o		o		o		o		o		o
USB GND		USB 5V		USB Data -      GND             LED D4 Green    GND             LED D5 Green
				white

I am trying to identify the other pins as well, feel free to label them....

if you have a proper crimp tool for the pins, it is possible to coax the existing pins out of the connector and replace them.

Obviously if you break something doing this, then don't come crying to me. Or Netgear. Or anyone.